Detailed Introduction
Model : A2/1.2363/X100CrMoV5/SKD12/X100CrMoV5-1/Cr5Mo1V
Application : Plastic Mould Steel
Content : Equivalent Steel with exact or nearest equivalents
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
|
1.2363 |
0.95-1.05 |
0.10-0.40 |
0.40-0.80 |
≤0.030 |
≤0.030 |
4.80-5.50 |
0.90-1.20 |
0.15-0.35 |
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
|
X100CrMoV5 |
0.95-1.05 |
0.10-0.40 |
0.40-0.80 |
≤0.030 |
≤0.030 |
4.80-5.50 |
0.90-1.20 |
0.15-0.35 |
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
|
SKD12 |
0.95-1.05 |
0.10-0.40 |
0.40-0.80 |
≤0.030 |
≤0.030 |
4.80-5.50 |
0.90-1.20 |
0.15-0.35 |
|
Grade |
C |
Mn |
P |
S |
Si |
Cr |
V |
Mo |
|
A2 |
0.95-1.05 |
0.40-1.00 |
≤0.030 |
≤0.030 |
0.10-0.50 |
4.75-5.50 |
0.15-0.50 |
0.90-1.40 |
A2 is an American high toughness wear-resisting tool steel, belonging to the wind hard section steel.The mass fraction of carbon is about 1%, and the hardness can reach 57~62HRC after heat treatment, and the mass fraction of chromium is about 5%.
After grinding, the steel surface luster is dark, corrosion resistance is good, ductility is very strong, and the damage resistance of the cutting edge of the mold is good.
The steel has good harden-ability, uniform carbide distribution, certain impact and good wear resistance.It has good air quenching performance, small size deformation and uniform carbide after air quenching.
China GB standard grade Cr6WV, German DIN standard material number 1.2363, German DIN standard grade X100CrMoV51, British BS standard grade BA2, French AFNOR standard grade Z100CDV5.Other corresponding brands are Swedish SS standard number 2260, Spanish UNE standard number x100CrM0v5, Japanese JIS standard number SKD12, American AISI/SAE standard number A2, Swedish ASSAB standard number XW-10.Chemical composition C:1.40-1.62;Si: 0.15-0.35;Mn: 0.30-0.60;Cr: 11.0-13.0;V: 0.20-0.50;Mo: 0.80-1.20;P: 0.025 the following;S: 0.010
Typical application examples 1. Deep drawing die, rolling die and embossing die.2, cutting tools.3, used in thermosetting plastic mold, integral quenching mold.
The hardness of A2 after heat treatment is higher than SKD11, and the hardness can reach 60-62hrC after tempering at high temperature (500-520℃), which exceeds SKD11 in strength.Features: A2 is an American high toughness wear-resisting tool steel, belonging to the wind hard section steel.The mass fraction of carbon is about 1%, and the hardness can reach 57~62HRC after heat treatment, and the mass fraction of chromium is about 5%. After grinding, the steel surface luster is dark, corrosion resistance is good, ductility is very strong, and the damage resistance of the cutting edge of the mold is good.The steel has good hardenability, uniform carbide distribution, certain impact and good wear resistance.It has good air quenching performance, small size deformation, uniform and fine carbide and good wear resistance after air quenching.
Contact Person :Wendy
Telephone:+86 18688633122 whatsapp&wechat
Skype: .cid.8920082fecfa0b5c
Email:ss@solarsteel.cn
